Maddie James
Pier 1 offers a range of LED and electric candles that are designed to mimic the look and feel of traditional candles without the risk of an open flame. These flameless candles can be purchased in sets of three, each candle equipped with a remote timer. To set the timer, locate the switch at the bottom of the candle, which has three settings: on, off, and timer. To activate the timer, turn the switch to timer at the desired time, and the candle will automatically turn off after 4-5 hours and relight at the same time the following day.
| Characteristics | Values |
|---|---|
| Number of settings | 3 (on, off, timer) |
| Switch location | Bottom of the lantern |
| Timer duration | 4-5 hours |
| Resetting | Required after battery replacement |
| Battery tab | Red |
| Remote control | Yes |
Explore related products
What You'll Learn
Switch to timer setting
To switch your Pier One candle to the timer setting, you'll need to locate the switch at the bottom of the candle, where the batteries go in. There, you should find three settings: on, off, and timer. To activate the timer, turn the switch to "timer" at the time you want the candle to come on each day. It will then automatically turn off after five hours and turn back on at the same time the following day.
The first time you use the timer function, be sure to pull off the red tab underneath the candle to allow the batteries to work. Then, at the time of evening you want the candle to come on, turn the candle upside down and move the switch to "timer". The candle will stay on for four to five hours and then turn off automatically. The next night, it will turn on by itself at the same time and continue to do so until the batteries need to be replaced.
The "timer" and "off" settings can be hard to read, so be sure to look carefully. When holding the candle upside down in your lap, the timer setting should be on the left side.
Please note that these instructions are for Pier One LED candles with a remote timer.
Rock Salt and Candles: A Relaxing Arrangement
You may want to see also
Explore related products
Lantern turns off automatically after 4-5 hours
To set your Pier One candle timer, you will need to locate the switch at the bottom of the lantern, where the batteries go. The switch will have three settings: on, off, and timer. To set the timer, turn the lantern upside down and move the switch to the "timer" setting at the time you want it to come on each day. The lantern will stay on for 4-5 hours and then turn off automatically. It will turn back on at the same time the next day and continue to do so until you change the settings.
The first time you set the timer, make sure to pull off the "red" tab to activate the batteries. The lantern will then come on at the same time each day and turn off after 4-5 hours, creating a consistent atmosphere in your home.
Flameless candles, such as those from LANGSHENG, often have similar timer functions. These candles usually have an ON/OFF/TIMER switch, allowing you to set the duration for which the candle will stay on. Some flameless candles may also come with a remote control unit, which you can use to set the timer conveniently.
It is worth noting that LED candles, like those from TED Lights, may have different timer settings. Some offer timer options of 4, 6, 8, and 10 hours, while others are designed to burn for 6 hours and then switch off automatically, lighting up again after 18 hours.
Broadway's Birthday Candles: How Long Does It Burn?
You may want to see also
Explore related products
Lantern turns on at the same time each day
To set your lantern to turn on at the same time every day, start by identifying the switch at the bottom of the lantern where the batteries go in. Make sure the red tab has been removed so that the batteries are activated. Then, at the time of day you want the lantern to turn on, turn the lantern upside down and move the switch to the "timer" setting. The lantern will stay on for 4-5 hours and then turn off automatically. It will turn back on at the same time the next day and continue to do so until the batteries need to be replaced.
The "timer" setting can be hard to read, especially the words "timer" and "off". When holding the lantern upside down in your lap, the timer setting is on the left side of the lantern.
You will have to reset the timer each time the battery needs to be replaced. To reset the timer, simply repeat the steps outlined above at the time of day you want the lantern to turn on.
Note that the lantern will only stay on for 4-5 hours after being turned on via the timer setting. If you want the lantern to stay on for a longer period of time, you can manually turn it on by moving the switch to the "on" setting.
Sealing Cement Candle Vessels: The Complete Guide
You may want to see also
Explore related products
Reset timer after battery replacement
Resetting the timer after battery replacement on your Pier One candle is a simple process. Firstly, locate the switch at the bottom of the candle, which has three settings: on, off, and timer. To reset the timer, turn the switch to the "off" position. This will stop the current timer settings from running.
Once the candle is turned off, you can replace the batteries. Ensure you insert new, high-quality batteries to ensure optimal performance and longevity. After inserting the batteries, you can reset the timer by turning the switch to the "timer" setting at your desired time.
The candle will now automatically turn on and off at the same time every day. It will stay on for 4-5 hours and then turn off automatically. For example, if you set the timer at 7 pm, the candle will turn on at 7 pm every day and turn off at midnight.
If your candle has a remote control unit, the process is slightly different. First, ensure the candle is switched on, and then use the remote control to set the timer. Push the command buttons on the remote control to set the desired duration. The remote may have timing durations such as 2H, 4H, 6H, or 8H, allowing you to choose the length of time the candle stays on.
Bewitched: Inspired by Bell, Book, and Candle?
You may want to see also
Explore related products
Pull off the red tab to activate batteries
To set up your Pier One candle timer, you must first ensure that the batteries are activated. This is a simple process but an important one, as it will enable you to use your candle lantern and set the timer function.
To activate the batteries, locate the base of the lantern where the batteries are housed. Here, you will find a small red tab. This tab is a safety feature to prevent the batteries from running down during storage and transit.
Gently pull this red tab to remove it. Once this is done, the batteries will be activated and ready for use. Now, you can set the timer function.
On the underside of the lantern, you will find a small switch with three settings: 'On', 'Off', and 'Timer'. The 'Timer' setting is usually on the left when holding the lantern upside down. Set the switch to 'Timer' at the time you want the candle to illuminate each day. It will then automatically turn off after 4-5 hours and will reactivate at the same time the following day.
Candle Conundrum: Are They Allowed in Delivery Rooms?
You may want to see also
Frequently asked questions
First, remove the "red" tab underneath the candle to activate the batteries. Then, turn the candle upside down and move the switch to "timer" at the time you want it to come on each day.
The timer switch is located underneath the candle, near the battery compartment.
Your Pier One candle will automatically turn off after 4-5 hours. It will then turn back on at the same time the next day.
If you need to replace the batteries, simply reset the timer by repeating the steps to set it for the first time.
Yes, the Pier One LED candles come with a remote timer that allows you to control the settings without having to manually adjust the switch.
