Jessie Taylor
In The Legend of Zelda: Phantom Hourglass, there is a point in the game where players need to blow into the Nintendo DS microphone to blow out candles and proceed to the next level. This can be challenging for players using an emulator, as the microphone button may not work, or the emulator may not pick up on the player's blowing. However, there are several solutions to this problem, including using a different emulator with better microphone support, configuring the microphone hotkey, or using a headset or earbuds to isolate the game sound and provide a clean, noiseless blow sound.
| Characteristics | Values |
|---|---|
| Game | The Legend of Zelda: Phantom Hourglass |
| Emulator | DeSmuMe, DraStic, RetroArch, MelonDS |
| Platform | MacBook, PC |
| Solution | Plug in a mic and blow into it, use the internal white noise sample, use a headset or earbuds, download a savestate, use a standalone emulator with better mic support, use a 'microphone blow' emulator, use Audacity to create an 8-bit mono PCM .wav file |
Explore related products
What You'll Learn
- Blow into the microphone on your device to blow out the candles
- Use a headset or earbuds to isolate game noise and blow into the microphone of your phone
- Download and copy a savestate file to your emulator folder
- Use a standalone emulator with better mic support
- Use Audacity and a USB mic to create an 8-bit mono PCM .wav file
Blow into the microphone on your device to blow out the candles
To blow out the candles in The Legend of Zelda: Phantom Hourglass, you need to blow into the microphone on your device. This can be done by following these steps:
Plug in a Microphone or Headset
If you are playing on a computer or a device without a built-in microphone, you will need to plug in a microphone or a headset with a microphone. This will allow you to blow into the microphone and interact with the game.
Configure the Microphone Settings
Depending on the emulator you are using, you may need to configure the microphone settings. For example, in DeSmuMe, you can set up a microphone hotkey by going to Config > Hotkey. You may also need to enable microphone input or set up specific hotkeys, as mentioned in some sources.
Position Yourself Correctly in the Game
In the game, make sure you are standing right next to the candle you need to blow out. If you are too far away, blowing into the microphone may not have the desired effect. Position yourself correctly in front of the candle, and you may even need to be at a specific location, like the Temple of Fire or the Isle of Ember.
Blow into the Microphone
Once you are in the correct position, blow into the microphone on your device or headset. This should trigger the game to recognize your breath as blowing out the candles. You may need to experiment with different blowing techniques, such as blowing gently or forcefully, to find what works best.
Alternative Methods
If blowing into the microphone does not work, there are alternative methods to try. Some emulators, like MelonDS, have a "microphone blow" feature that may work better. Additionally, you can try using a specific savestate or downloading a .wav file to simulate the microphone input and blow out the candles. These methods are recommended if you are having trouble with the microphone functionality.
Unscented Candles: Safe or Unsafe for Parakeets?
You may want to see also
Explore related products
Use a headset or earbuds to isolate game noise and blow into the microphone of your phone
To blow out the candles in The Legend of Zelda: Phantom Hourglass, you need to be standing right next to the candle. If you are playing on an emulator, there are a few things you can try.
One solution is to use a headset or earbuds to isolate the game noise and blow into the microphone of your phone. Make sure you are directly in front of the candles by listening for the bell sound that indicates your position. Then, blow into the lower part of your phone where the microphone is located. This method blocks out the game's sound and music, allowing the emulator to register a clean, noiseless blow.
Alternatively, you can try using a physical microphone. Plug it into your device and blow into it while standing next to the candles in the game. This method does not require earbuds or a headset since the microphone is separate from the device.
If you are using the DesMuMe emulator, there is another option. DesMuMe has an internal white noise sample that can be used for this puzzle. You need to configure the microphone hotkey by going to Config > Hotkey. Then, simply activate the hotkey when you are standing next to the candles to blow them out.
Candles and Cats: A Safe Combination?
You may want to see also
Explore related products
Download and copy a savestate file to your emulator folder
To download and copy a savestate file to your emulator folder, follow these steps:
- Download the savestate file: You can download the savestate file directly from the provided link: http://www.4shared.com/file/GqjtPc7uce/ ... uglas.html. This file will allow you to bypass the candle-blowing obstacle in the game.
- Rename the downloaded file: Change the name of the downloaded savestate file to match the name of your Zelda Phantom Hourglass ROM file on your device. For example, if your ROM file is named "Zelda Phantom Houglas.dsv", rename the downloaded savestate file to "Zelda Phantom Houglas.dsv" or "zelda rom name.dsv". This step is crucial to ensure the emulator recognizes the savestate file.
- Copy the renamed file to the emulator folder: Locate the folder where your Drastic emulator is installed. The path is typically "sdcard/DraStic/backup". Use a file explorer tool like "ES File Explorer" to navigate to this folder if needed. Before copying the file, you may want to back up your previous savestate to avoid losing any progress. Copy the renamed savestate file into the emulator folder.
- Launch the emulator: After copying the file, start your Drastic emulator as you normally would. The emulator should now load with the updated savestate, allowing you to bypass the candle-blowing section in The Legend of Zelda: Phantom Hourglass.
By following these steps, you can successfully download and implement the savestate file to progress in the game without needing to blow out the candles.
Mixing Candles: Create a Warm Banquet Ambiance
You may want to see also
Explore related products
Use a standalone emulator with better mic support
If you're playing The Legend of Zelda: Phantom Hourglass on an emulator, you will need a microphone for your computer, as well as an emulator that supports microphones. One standalone emulator that supports microphone input is melonDS.
To blow out the candles in the Temple of Fire, you need to be standing right next to them. If you're using a DS, simply blow into the microphone. If you're using an emulator, you can try plugging in a headset or earphones and blowing into the microphone on your phone. Make sure you are right in front of the candles and that you hear a bell sound, indicating that you are properly positioned.
Alternatively, you can download and copy a savestate to your Drastic emulator folder. Remember to change the name of the savestate to make it the same as the name of the Zelda Phantom Hourglass ROM on your device. You may need to download a tool to navigate the folders of your device, such as "ES file explorer".
Another potential solution is to configure the microphone hotkey by going to Config > Hotkey. You can also try snapping your fingers or clapping if you are unable to blow into a microphone.
Effective Ways to Melt the Bottom of a Candle
You may want to see also
Explore related products
Use Audacity and a USB mic to create an 8-bit mono PCM .wav file
To blow out the candles in the Temple of Fire in The Legend of Zelda: Phantom Hourglass, you need to blow into the microphone. When playing the game on an emulator, you can plug a microphone into your device and blow into it to trigger the in-game action.
Now, to create an 8-bit mono PCM .wav file using Audacity and a USB mic, follow these steps:
- Set up your USB microphone and ensure it is connected to your computer.
- Open Audacity and from the "Input Device" drop-down menu, select your USB microphone as the input device.
- Click on the "Recording Device" drop-down menu and ensure that the correct device is selected.
- Adjust the input volume levels by speaking or blowing into the microphone and using the slider to set the level just below the red clipping zone.
- Once the levels are set, click on the "Record" button (the round red button) to start recording.
- Speak or blow into the microphone as desired, and then click the "Stop" button (the square button) to end the recording.
- To export your recording as an 8-bit mono PCM .wav file, go to "File > Export > Export as WAV."
- In the "Save as type" drop-down menu, select "Other uncompressed files."
- In the "Options" dialog box, from the "Header" drop-down menu, select "WAVE (Microsoft) PCM."
- Set the "Encoding" to "Unsigned 8-bit PCM," the "Channels" to "1 (Mono)," and the "Sample Rate" to "8000 Hz."
- Click "OK," then "Save," and your recording will be exported as an 8-bit mono PCM .wav file.
Please note that the specific steps may vary slightly depending on your version of Audacity and your operating system.
Candles: Are They Harming Your Health and Home?
You may want to see also
Frequently asked questions
There are several methods to blow out the candles in the Phantom Hourglass DS emulator. One method is to use a microphone. Get close to the candles and blow into the microphone to blow them out.
If your microphone doesn't work, try using the MelonDS emulator, which has 'microphone blow' support.
Yes, another method is to use a headset or earbuds. Plug them into your phone and blow into the microphone hole at the bottom of your phone.
You can try to create an 8-bit mono PCM .wav file using software like Audacity and a USB microphone.
Yes, you can download sanctioned save files to skip this part of the game. Alternatively, you can try using a different emulator with better microphone support, such as a standalone emulator like Desmume.
![FHYRGF[30000 in 1] R40S PRO Handheld Game Console 3.5 inch IPS Screen Mini Retro Console 3800mAh Portable Pocket Arcade 12+ Mainstream Emulator 256G TF Card Transparent.(Blue)](https://m.media-amazon.com/images/I/71eGtVHaE3L._AC_UL320_.jpg)
